Tag Archives: methods of curing of concrete

Curing of Concrete – Concrete Curing Methods explained

Curing concrete is the process of preserving the requisite moisture and temperature in hardened concrete for continued hydration. Concrete’s curing is crucial for sustaining the material’s longevity and design strength. This article discusses the importance of curing and the various concrete curing methods prevailing on construction sites.

  1. Curing of concrete methods
  2. Why Curing of concrete is important?
  3. Concrete Curing time as per IS 456-2000
  4. Concrete curing methods
    1. Water Curing method
    2. Membrane Curing method
    3. Steam curing method
  5. Conclusion

Curing of concrete methods

Curing is the process of retaining moisture to allow fresh concrete to reach its intended strength in a predetermined manner through a hydration reaction. Concrete is a mixture of cementaggregates, and water in fixed designed proportions calculated based on specific strength requirements. The water to cement ratio is the most important factor in these proportions (Water cement ratio). In order to facilitate the hydration reaction, the water-cement ratio must be maintained. If the water evaporates quickly, there will not be enough water available for the hydration process. Because of this curing of concrete is required.

Curing assists in the retention of moisture until the hydration process is complete and it reaches the required strength. The American Concrete Institute (ACI) Committee 301 recommends a minimum cure duration equal to 70% of the required compressive strength. According to IS 456-2000 standards and construction norms, the curing period of 7 days/10 days is the time required to achieve at least 70% of the intended compressive strength. That is why concrete is cured for 7-10 days.

Related posts from vincivilworld

Why Curing of concrete is important?

Perfect curing is necessary for the following reasons in order to achieve good strength and serviceability:

  • Curing prevents concrete from drying and maintains the acceptable temperature range by preventing moisture loss.
  • Curing increases the strength and decreases the permeability of hardened concrete.
  • Curing prevents the formation of cracks caused by thermal and plastic shrinkage.
  • Concrete curing maintains a strong link between the components and the reinforcement.
  • Curing can provide the desired strength and a durable concrete free of cracks.
  • Concrete curing assists in achieving high serviceability performance by improving abrasion resistance.

Also Read : Concrete Pumps Types – Application and advantages

Concrete Curing time as per IS 456-2000

According to the Indian Standard IS 456 – 2000, concrete should be allowed to cure for a minimum of seven days while using ordinary Portland cement and for a minimum of ten days while using blended cement or concrete with mineral admixtures. Additionally, it suggests that the curing time should not be less than 10 days for structures exposed to hot, dry weather and 14 days in case for or blended cement or cement with mineral admixtures.

OPC cement = 7 Days (Normal conditions) and 14 Days ( Hot and dry weather)

Concrete with mineral admixture or blended cement (PPC cement) = 7 Days (Normal conditions) and 14 Days ( Hot and dry weather)

Concrete curing methods

The curing method and time primarily depend on structure type, site conditions, and ingredient parameters. Some of the curing methods adopted in constructions sites are as follows.

  • Water curing
  • Membrane Curing
  • Steam curing

Water Curing method

Water curing is the most popular and common method adopted in construction sites. Basically, this method maintains or retains water on the concrete surface by various methods. This includes ponding, sprinkling and fogging, and saturated wet coverings or left-in-place forms.
Similarly, these methods prevent water loss from the concrete surface by continuous wetting of the exposed surface of the concrete.

Water curing
Water curing

Membrane Curing method

The basic concept of membrane curing is reducing the loss of water from the surface of the concrete. Generally, membrane curing methods uses curing compounds or impervious plastic sheets. Curing compounds are available in water-based and acrylic-based types. They form an impermeable membrane and reduces the loss of moisture.

Membrane curing /Curing compound
Membrane curing /Curing compound

Steam curing method

The steam curing process accelerates the process of strength gaining by using heat and providing additional moisture. Generally, this speeds up the early hardening process. Basically, these methods are familiar in prefabricated structures and factory-made precast components for the speedy recovery of form works.
Accordingly, Steam curing keeps the surface moist and raises the concrete temperature to speed up the strength achievement rate.

Steam curing - Precast factory
Precast factory


Now a days curing activity is not taken seriously and this hampers the strength and quality. Likewise, this is an activity to be done with utmost care to ensure design strength and serviceability of structures.